Overview

Shows all the test that have been run or are in the process of being run.  
Provides details on the individual run (group of tests) and details.  Selecting any row will advance you to the Run Summary page 

The following information is detailed on the Run Summary page

  • Status
  • Run Name
  • Platforms 
  • Filters 
  • Start time
  • Duration
  • Test Breakdown
  • Failure Categorization


Status

  • Red: Failed.  A test failed on at least one platform and requires additional attention
  • Green: Passed.  All steps on all platforms passed
  • Yellow (red outline): Aborted.  Test was stopped prior to its completion
  • Grey: No results - the test didn't run due to an error / issue or it was disabled
  • For runs that are in process:an ABORT button will be available.  Selection will STOP the run.  

Run Name The name of the run group.  
A run group can have multiple tests associated with it. 

Platforms  The platform(s) that the run group were executed against.  The run group will run tests on each platform selected (browser / device).  
Can toggle between Platforms / Filters

Filters  Any filters associated with the run.  
Can toggle between Filters / Platforms

Start Time The date and time the run started.  
Can toggle between Start Time / Duration

Duration  The  time it took for the run group to execute.  
Can toggle between Start Time / Duration

Test Breakdown  Three numbers indicating test status of individual tests in the run.  

  • First Number: Number of tests that passed.
  • Second Number: Number of tests that failed (if 1 or more the run group has failed)
  • Third Number: Number of tests that have no results (if 1 or more the run group is aborted).

Failures Categorized
Shown only if the run group had a failure.  Shows the percentage of failed tests that have been categorized.  For more information please see the Failure Categorization documation.

Did this answer your question?